Chemical and Biomolecular Analysis Facility

General Rules

All new users are required to be trained by the facility staff prior to using an instrument unless they can demonstrate instrument competency
Reserve all instrument using the iLab management software.
Log in and log out using the log book next to the instrument.
If assistance is required for an experiment, please notify the facility director (Note: you will be charged for this). Periodic assistance with problems arising is not subject to an additional charge.
Reserved and unused time will result in the user’s laboratory being billed at the hourly rate. Cancellations must be made at least one hour prior to the scheduled session.
Prior calendar reservation is required for all instruments.
Safety goggles should be worn all the time in the sample preparation lab. Safety goggles should also be worn in the instrument lab when performing sample introduction to the instruments.
Lab coat should be worn all the time in the instrument room.
No food or drinks are allowed in the lab.
No radioactive, or highly dangerous biological or chemical samples are allowed in the lab.
Working with chemicals or preparing samples on the computer desks is not allowed.
Failure to adhere to these policies can result in the loss of instrument access.

Calendar

In order to reserve a time or request a service, use the following steps:

Reserve an equipment:

Go to the following URL: https://augusta.corefacilities.org
Click "here" to login in as an Internal Augusta University user.
Log in with your Augusta University username and password.
Click on "list all cores".
Click on "Chemical and Biomolecular Analysis Facility".
Click on "Schedule Equipment".
Find the instrument you wish to reserve and left click on it.
Double click on the calendar on a time you wish to reserve (ex. If you want to create a time for 1-4 PM, double click on the 1-2pm block), a new window ‘Create a new reservation” will open. Fill all information in and click ‘Next’ to open a new window called ‘Reservation details’.
Adjust the time so that it accurately reflects the time you want.
When done, click "Save Reservation" on the bottom left.

This is assuming that your lab already has iLab setup correctly.

Request a service

Go to the following URL: https://augusta.corefacilities.org
Click ‘here’ to login in as an Internal Augusta University user.
Log in with your Augusta University username and password.
Click on "list all cores".
Click on"Chemical and Biomolecular Analysis Facility".
Click on "Request Service"
Find the service you want to request, and click "initiate request" on the right side to fill in the service request form.
When done, click "submit request to researcher".

CBAF Fees

NMR Fees

User Type	300 MHz	500 MHz	Operator Charges (minimum 1 hour)
Internal Users (Peak: 8am-6pm Monday to Friday)	$6/hour/peak $4/hour/off-peak	$12/hour/peak $8/hour off-peak	$30/hour
External Users (academic)	$9/hour/peak $6/hour/off-peak	$18/hour/peak $12/hour/off-peak	$45/hour
External Users (non-academic)		$100/hour (instrument and staff) $36/hour (instrument only)

Users will be billed for all hours booked online that are not canceled 1 hour in advance.
The minimum booking/and billing unit is 1 hour; fractions of an hour of usage will be rounded upwards.

Circular Dichroism Fees

User Type	Instrument Charges	Staff Assistance
Internal Users	$15/hour	$30/hour
External Users (academic)	$25/hour	$45/hour
External Users (non-academic)	$50/hour	$60/hour

*Extra fees may be applied for liquid nitrogen purchase if 1) we do not have enough samples for 1 tank of liquid nitrogen, and 2) you want to run your sample ASAP before enough samples can be accumulated.

ICP-OES Fees

Price per hour of instrument time: Hourly costs apply to those who come to the facility and run their samples on the instruments with sufficient training. Training is given only to those who plan to use the instruments on a routine basis.

Internal users: $30/hour
External users (academic): $40/hour
External users (non-academic): $80/hour

Price per sample: Per sample costs apply to those who send sample to the facility for analysis. Prices include blanks and standards sent to be run along with the samples.

Internal users: $10/sample
External users (academic): $20/sample
External (non-academic): $40/sample

Staff Charges for sample preparation: if sample preparation needs to be done in the facility

Internal users: 30$/hour
External users (academic): $45/hour
External (non-academic): $60/hour

*Extra fees may be applied for Argon purchase if 1) we do not have enough samples for 1 tank of Argon and 2) you want to run your sample ASAP before enough samples can be accumulated.

LC-MS Fees

User Type	Instrument Charges	Staff Assistance
Internal Users	$8/hour	$30/hour
External Users (academic)	$15/hour	$45/hour
External Users (non-academic)	$30/hour	$60/hour